You can breathe easier knowing that the Predator Restoration Goldmorr Technicians are hard at work changing the restoration process through innovative technology. Predator Restoration has all of the surrounding areas covered as the go to Master Technician in the area. Houston, Fort Bend, Harris County, Montgomery County, and Brazoria County.
Goldmorr is a multi-step process designed to eliminate microbial growth inside your home or commercial property. Available only through Certified Master Technicians, Goldmorr is a low impact non invasive complete mold remediation product.
The Goldmorr System of mold removal is the future of Mold Remediation. This unique system has had years of success. It’s guaranteed to remove all types of mold from your home or building safely, quickly and with less cost than traditional methods. In most cases, home and business owners do not have to relocate while the remediation process takes place.
All visible microbial growth is identified and directly treated with an application of GM6000. This eliminates any organic growth on drywall, wood framing, decking and removes any staining left by mold.
Visible mold is not scary as the mold spores in the air you can not see. Predator has both a water and oil based application that will eliminate all those unwanted smells (great for people looking to stop smoking!)
You have leather, swede, canvas, cotton, furniture, shoes, bags that have been attacked by Mold? No problem, let Predator restoration help you save your favorite pair of shoes.
Although you can't find a world, U.S., state or local standard of mold levels, you can however find temperature and humidity standards written by ASHRAE and a published standard by the ISO on air quality. Allow Predator to come check the air quality in your home or business today.
When a Goldmorr® Master Technician refers to fogging, it is the process by which the GM2000 is applied within your dwelling. The product is misted by use of a spray device and so can gain far greater and more consistent coverage of an entire home; similar to the steam created when you have a hot shower.
This is simply because mold spores spread. They are carried on your clothing, as well as being present in the air. If the entire dwelling is not fogged, then the mold will return in other rooms under the right conditions. The bottom line here is that we can confidently use GM2000 knowing that you are extremely unlikely to have any reaction to it. It is not going to harm any of your furnishings either. We have performed many treatments with occupants who suffer with such ailments as asthma and multiple sclerosis and others going through chemotherapy. All have reported improvements in their own well-being following mold removal and fogging, with a lot of clients opting for an annual fog regardless of the fact that mold may not be present.
Note: If you are shopping around for mold remediation, please ensure that the products used have been tested and pose little/no danger to your health and well-being.
"Chemistry is the future of effective mold remediation. For decades the only solution to both visible and hidden microbial growth in a home or building has been labor intensive selective demolition, sanitation and scrubbing of surfaces combined with HEPA filter air scrubbing for days.
Predator Restoration is using advanced chemistry and less destructive remediation practices to get homeowners back in their home faster. We have worked many cases with Predator and their professionalism and attention to detail has allowed homeowners to gain clearance and get back to normal life much faster than I have seen in the years leading to this new way of microbial growth remediation.
I would encourage anyone with a visible or hidden microbial or odor problems to consider using qualified systems that rely on gas and good chemistry to remove viable and allergenic mold problems."
Mold Assessment Consultant Lic. #1374
Professional Real Estate Inspector Lic. #3066 since 1991
The testing of this product has included skin irritation testing, also known as Acute Dermal Irritation/Corrosion testing and showed results at no signs of erythema or oedema at any time with examinations conducted at 60minutes, 24, 48 and 72 hours. What this means is that the product can be classified as a non-skin irritant product. Further testing of the product regarding its biodegradability was conducted with the result described as “rapid and excellent biodegradability”. Our product achieved a degradation of 95% with a substance that has greater than 70% described as having excellent biodegradability. It is non caustic/low VOC and non toxic.
Recently, testing was conducted on the effectiveness of GM2000 on Stachybotrys chartarum and Aspergillus niger with outstanding results achieved. GM2000 was able to reduce Stachybotrys chartarum >99.99996% and Aspergillus niger >99.99998%.
Aside from a water intrusion event such as flooding, leaking roofs, damaged pipes or hot water systems etc., the most common cause of mold comes from air exchange issues. Air exchange issues arise when excess humidity is present. This is very common at times when the outside air is cooler than the inside air. This will result in condensation and subsequently an excess of moisture inside your home. In the winter months, this is very common with the use of furnaces and heaters. They warm up the air inside the dwelling, be it an office or a home, and if the outside air is cold we start to see moisture on the inside of the windows. We have all seen what happens when you leave a milk carton out on your counter, condensation forms on the exterior of the bottle or carton and before long it is sitting in a puddle of water. Technically, the temperature at which the condensation starts to form is called Dew Point.
In the summer months, humidity due to weather will cause similar conditions to those that are present during the winter months that contribute to the ideal conditions for the growth of mold. The reason that we see mold starting to form and quickly get out of control, is simply because mold spores are everywhere. 25% of the earth’s biomass is made up of different kinds of mold and mold spores. The spores are very small and float in the air. They are carried on clothing, they can enter the structure by simply coming in on a breeze. They may be present in furnishings, plants or even food that has formed mold colonies such as those seen on outdated bread or fruit. To flourish, they simply need the right conditions. This includes moisture, which, as mentioned previously, can come from excess humidity within the structure. Your Goldmorr professional will advise you on ways that you can reduce the excess moisture and humidity within your structure, which will aid in keeping mold at bay.